Locations · WA

Silica training in Western Australia

In WA, crystalline silica training must be accredited or approved by WorkSafe WA. Our free course can help you learn, but it is not a WorkSafe-approved course.

The course and test are free. In this state, use an accredited or approved course for the legal training duty.

Important for this state

Silica Academy is not approved by WorkSafe WA, so our certificate does not meet WA's crystalline silica training duty on its own. Use an accredited unit or a WorkSafe-approved course for that. You're welcome to use our free course to learn or refresh.

WA's silica rules

Western Australia uses the Work Health and Safety Act 2020 and the WHS (General) Regulations 2022. The crystalline silica substance amendments started on 1 September 2024. Engineered stone slabs, panels and benchtops are banned, and uncontrolled processing of engineered stone is prohibited. WorkSafe WA also treats uncontrolled dry cutting of other silica materials as a breach of the general duty in section 19 of the Act.

WorkSafe WA's website says it is now part of the Department of Local Government, Industry Regulation and Safety.

Who needs silica training in WA

WorkSafe WA's guidance says:

Records must be kept while the worker does the processing and for 5 years after. The silica risk control plan can hold them.

What counts as training in WA

Training must be accredited or approved by the regulator:

WorkSafe's approval checks course content against technical criteria. It doesn't assess how the course is delivered.

Where Silica Academy fits

Our free course and test cover the same national rules: health risks, materials, controlled processing, the five dust controls, respirators, fit testing, housekeeping, plans and monitoring. You can use them to learn before an approved course or as a refresher. But in WA, our certificate isn't approved training, so don't rely on it for the training duty.

Health monitoring is different in WA

WA's minimum health monitoring for crystalline silica includes low-dose high-resolution CT of the chest, not a chest X-ray. The doctor must send the regulator a copy of any report with results consistent with silica exposure.

Reporting exceedances

If air monitoring during high-risk processing finds respirable crystalline silica above 0.05 mg/m³, the business must report it to the WorkSafe Commissioner on the notification form. WA moves to workplace exposure limits on 1 December 2026, and silica stays at the same value.

The WA Silica Plan

The Western Australia Silica Plan 2025–2030 supports the national Silica Strategic Plan. Its priorities are workplace risk reduction, education, health monitoring and screening, research, and international collaboration.

Frequently asked questions

Which silica courses are approved in WA?

Accredited units 10830NAT, CPCSIL3001 and CPCSIL4001, plus the WorkSafe-approved HIA and NECA courses listed by WorkSafe WA.

Does Silica Academy's certificate count in WA?

Not for the crystalline silica training duty. It isn't approved by WorkSafe WA. You can still use the free course to learn.

Is health monitoring different in WA?

Yes. WA's minimum includes a low-dose high-resolution CT scan of the chest rather than a chest X-ray.

Is dry cutting allowed in WA?

Uncontrolled processing of engineered stone is prohibited, and WorkSafe WA treats uncontrolled dry cutting of other silica materials as a breach of the general duty.

Sources

Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.

Related

LocationsSilica training rules in every Australian state and territory: what each regulator accepts, where our free online course fits, and NSW city guides.NSWSilica training in NSW explained: who needs it under s529CD, SafeWork NSW's 11 criteria and the records employers keep. Free online course and test.RPE and fit testingRespirators for silica dust in NSW: P1, P2 and P3 filters, protection factors, AS/NZS 1716 checks, yearly fit testing, fit checks and facial hair rules.Silica exposure standardThe exposure standard for respirable crystalline silica is 0.05 mg/m³ over 8 hours. From 1 December 2026 it's called a workplace exposure limit, same value.High-risk silica processingWhat counts as processing and high-risk processing of crystalline silica in NSW, the written assessment factors, and what follows when work is high risk.

Learn the silica basics for free

Our free online course explains silica health risks, controls, respirators and housekeeping in plain English. Use it to prepare for, or refresh after, the course your state requires.