Silica training for stonemasons
Stonemasons work with some of the highest-silica materials there are. Natural stone is still legal to work, but every cut, grind and polish must be controlled.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
High-silica materials
SafeWork NSW gives these typical crystalline silica levels for stone:
| Stone | Typical crystalline silica |
|---|---|
| Sand and sandstone | 70 to 100% |
| Granite | 20 to 45% (typically 30%) |
| Slate | 20 to 40% |
| Marble and limestone | about 2% |
| Manufactured (engineered) stone | 93% or more |
Natural stone varies from quarry to quarry. The silica code says natural materials should be tested by a NATA-accredited laboratory, and if they haven't been, you should assume a high silica content.
The engineered stone ban
Since 1 July 2024, it has been illegal in NSW to make, supply, process or install engineered stone benchtops, panels and slabs. Imports have been banned since 1 January 2025. Natural stone, and porcelain or sintered stone without resin, are not banned, but they are still crystalline silica substances.
Legacy engineered stone (installed before the ban) can only be processed for removal, repair, minor modification or disposal. The work must be controlled, and the business must notify SafeWork NSW in writing before it starts. The engineered stone guide explains the notification rules.
On 20 November 2026, SafeWork NSW announced a stone business had been fined $105,000 over workers' risk of exposure to silica from cutting manufactured stone in 2021 and 2022.
Controls in the workshop and on site
- Wet processing. Cutting, grinding and polishing stone with water-fed tools designed for water, at a steady flow. Filter recycled water and manage slurry.
- Local exhaust ventilation on benches and booths, with the capture point close to the work.
- On-tool extraction for hand-held tools, with an M- or H-class vacuum.
- Isolation. Keep cutting and polishing areas separate from the rest of the workshop.
- Respirators chosen for the protection factor the work needs. A competent person selects RPE for high dust levels.
- Housekeeping. Clean slurry and settled dust at least daily. No dry sweeping, no compressed air.
Is it high risk?
Stonemasonry often involves high-silica materials, frequent processing and long exposure. Your employer must assess each process in writing, without counting respirators. If it is high risk, you need training, health monitoring and registration on the Silica Worker Register within 28 days. Air monitoring is needed when exposure is uncertain, and results over the exposure standard must be reported to SafeWork NSW within 14 days.
Get trained online
The free course covers all 11 SafeWork NSW criteria. Stonemasons should focus on Module 2: materials, Module 7: choosing the right respirator and Module 11: the law. Then take the free test.
Frequently asked questions
Can I still cut natural stone benchtops?
Yes. Natural stone is not banned. It is still a crystalline silica substance, so the processing must be controlled and assessed for risk.
Can I repair an existing engineered stone benchtop?
Minor repairs and modifications to legacy engineered stone are allowed if the work is controlled and SafeWork NSW has been notified in writing before the work starts.
Is sandstone higher in silica than granite?
Usually. SafeWork NSW lists sand and sandstone at 70 to 100% crystalline silica and granite at 20 to 45%.
Does the course cover health monitoring?
Yes. Module 11 explains when health monitoring is required and what it includes.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.