Silica duties and training for builders
Builders bring many trades together on one site, and most of them cut, drill or grind something that contains silica. Here is what the NSW rules expect, and how to get your team trained.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Your duties as a PCBU
Concrete, brick, block, tiles, pavers, fibre cement and stone are all crystalline silica substances (at least 1% crystalline silica). When they are cut, ground, drilled or broken on your sites, the WHS Regulation 2025 applies. As a person conducting a business or undertaking (PCBU), you must:
- make sure all processing of these materials is controlled (section 529C)
- assess in writing whether processing is high risk, without counting respirators or administrative controls (section 529CA)
- have a silica risk control plan, or a SWMS for high risk construction work, before high-risk processing starts (section 529CB)
- give crystalline silica training to workers involved in, or exposed because of, high-risk processing, and keep the records (section 529CD)
- carry out air monitoring when you aren't certain exposures are under the limit, and report results over the limit to SafeWork NSW within 14 days (section 529CE)
- provide health monitoring for workers doing high-risk processing
- register those workers on the Silica Worker Register within 28 days.
Since 1 July 2026 you must also follow approved codes of practice, including the silica code, or reach an equal or higher standard.
What it looks like on a building site
A typical residential or commercial build has many silica tasks: slab cutting, core holes, chasing, cutting bricks and blocks, tiling, fibre cement cladding, demolition and clean-up. Each trade's SWMS should cover its silica tasks, and the site plan should stop one trade's dust from reaching others. Set up cutting stations away from work areas, keep M- or H-class vacuums on site, and ban dry sweeping and compressed air.
Subcontractors and the register
The Silica Worker Register rule is clear: a subcontractor registers its own workers, not the principal contractor. You still need to coordinate. Ask subcontractors for their silica risk assessments, SWMS, training records and confirmation that their high-risk workers are registered.
Rollout checklist
- List every task on your sites that processes a crystalline silica substance.
- Assess each task in writing and decide whether it is high risk (if unsure, treat it as high risk).
- Make sure every task is controlled: at least one listed dust control, plus respirators for anyone still at risk.
- Prepare a silica risk control plan or SWMS before high-risk work starts, with your workers.
- Train workers to the approved standard and keep the records.
- Arrange air monitoring where exposure is uncertain and health monitoring for high-risk workers.
- Register high-risk workers on the Silica Worker Register within 28 days.
Read more: what counts as high-risk processing · silica risk control plan or SWMS · the Silica Worker Register · silica training in NSW
Training your team with Silica Academy
Email support@silicaacademy.com.au with your business name and how many workers you need to train. We invoice your business and send single-use codes. Each worker does the free course and test, enters their code at checkout, and gets a certificate and employer training record straight away. You can check every certificate at verify. See for employers for the full process.
The course is built to SafeWork NSW's 11 criteria for approved crystalline silica training. It is non-accredited, and you decide whether it meets your duty.
Frequently asked questions
Do I need a separate silica risk control plan if I have a SWMS?
Not if the work is high risk construction work and the SWMS covers everything the plan must contain and is prepared before work starts.
Who registers subcontractors' workers on the Silica Worker Register?
The subcontractor registers its own workers. The principal contractor doesn't register them.
How long do I keep training records?
While the worker carries out high-risk processing, and for 5 years after they stop working for your business.
Does every worker on site need silica training?
Training is required for workers involved in, or exposed because of, high-risk processing. Everyone who may be exposed must get information and instruction.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.