Silica rules for concrete cutting and drilling businesses
Wall sawing, slab sawing, core drilling and floor grinding are silica processing all day, every day. Your controls, plans and records need to be watertight.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Silica is the core risk of your work
Concrete is 25 to 70% crystalline silica according to SafeWork NSW. Every service you offer processes it: slab and road sawing, wall sawing, core drilling, floor grinding and polishing, chasing and demolition cutting. Because your crews do this for long periods and often indoors, your written assessment will need to look closely at whether the work is high risk. If you're unsure, the law treats it as high risk.
Wet cutting done properly
The silica code of practice sets out what effective wet suppression needs:
- tools designed for water, with a suitable IP rating
- a consistent flow at the cutting point, usually at least 0.5 litres per minute
- no way for workers to turn the water down or off during the task
- the right nozzle, guards and flaps
- slurry managed before it dries, and recycled water filtered
- electrical and slip risks managed.
Spray bottles, sponges and garden hoses are not adequate.
Extraction for dry tools
Where a tool is designed for dry use, on-tool extraction needs a fitted shroud, a suitable hose and an M- or H-class vacuum. Floor grinders and wall chasers should be matched with extractors sized for them. Indoors, consider local exhaust ventilation or air cleaning as well.
Plans, monitoring and health checks
- A silica risk control plan, or a SWMS for high risk construction work, before work starts, developed with your workers.
- Air monitoring when you aren't certain exposures are under the limit, with breathing-zone samples analysed by a NATA-accredited lab. Results over the limit go to SafeWork NSW within 14 days, even if respirators were worn.
- Health monitoring for workers doing high-risk processing, and registration on the Silica Worker Register within 28 days.
- Review controls when monitoring shows levels at or above half the exposure standard.
Rollout checklist
- List every task on your sites that processes a crystalline silica substance.
- Assess each task in writing and decide whether it is high risk (if unsure, treat it as high risk).
- Make sure every task is controlled: at least one listed dust control, plus respirators for anyone still at risk.
- Prepare a silica risk control plan or SWMS before high-risk work starts, with your workers.
- Train workers to the approved standard and keep the records.
- Arrange air monitoring where exposure is uncertain and health monitoring for high-risk workers.
- Register high-risk workers on the Silica Worker Register within 28 days.
Read more: what counts as high-risk processing · silica risk control plan or SWMS · the Silica Worker Register · silica training in NSW
Training your operators
Email support@silicaacademy.com.au with your business name and how many workers you need to train. We invoice your business and send single-use codes. Each worker does the free course and test, enters their code at checkout, and gets a certificate and employer training record straight away. You can check every certificate at verify. See for employers for the full process.
Frequently asked questions
Is core drilling high-risk processing?
Drilling a crystalline silica substance is processing. Whether it's high risk depends on your written assessment, and if you're unsure it is taken to be high risk.
What flow rate should a wet saw have?
The silica code says effective wet suppression usually needs at least 0.5 litres per minute at the cutting point, from a tool designed for water.
What vacuum class do we need?
M- or H-class under AS/NZS 60335.2.69:2017, for both on-tool extraction and clean-up.
When must we review our controls?
When they aren't working, including monitoring at or above half the exposure standard, before significant changes, when a health and safety representative asks, and at least every 5 years.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.