Locations · NSW

Silica training on the Central Coast

Building, renovating, landscaping and roadworks on the Central Coast all create silica dust. If you also travel to sites in Sydney or Newcastle, your online silica certificate goes with you, and each employer can check it online.

Course and test are free. Certificate $49, paid only if you pass.

Homes and renovations

Residential building is a big part of the work on the Central Coast: new homes, extensions, granny flats and renovations. The common silica tasks are cutting bricks, blocks and fibre cement cladding, cutting and grinding slabs and driveways, cutting tiles, and stripping out old tiles, grout and render in kitchens and bathrooms.

The code of practice points to simple ways to make less dust in the first place. Scoring and snapping tiles, instead of cutting them with a power saw, is one example. Using a hand saw on autoclaved aerated concrete (AAC) panels is another. Our page for tilers has more on tile work.

Landscaping and paving

Courtyards, pool surrounds, retaining walls and garden edges mean a lot of cutting. Cutting and laying pavers is a known source of silica dust, and the code of practice lists pavers and blocks as crystalline silica substances. Natural stone is high in silica too. SafeWork NSW puts sandstone at 70 to 100% and granite at 20 to 45%.

Cut with water or on-tool extraction, and clean up slurry before it dries and turns back into dust. Landscaping businesses can read our landscapers page.

Roadworks

Road crews on the Coast cut asphalt and concrete, dig trenches and lay kerbs and footpaths. The code of practice lists asphalt as a crystalline silica substance, and road construction is one of the tasks it names as creating silica dust. Saw cutting on a hot, dry day can put a lot of dust in the air, so water and extraction matter here as much as anywhere.

Travelling to Sydney and Newcastle sites

If you live on the Coast and travel to jobs in Sydney or Newcastle, a few things are worth knowing:

What Central Coast employers must do

The silica rules apply to small builders and trade businesses just as they do to large ones. Before high-risk processing starts, a business needs a written assessment and a silica risk control plan, or a SWMS on high-risk construction work. It must control the dust, train the workers who need it, keep the training record for 5 years after each worker leaves, and register workers doing high-risk processing on the Silica Worker Register. Builders can read our page for builders, and the full rules are on our NSW silica training page.

Doing the course from home on the Coast

The course fits around a long commute. Do it at home in the evening, or as a passenger on the way to site. Most people finish in 45 to 60 minutes, and the test takes about 15 minutes. You have 24 hours after passing to pay for your certificate.

Frequently asked questions

Does cutting pavers for a backyard job count as silica processing?

Yes. Pavers are crystalline silica substances, and cutting them with a power saw is processing. Whether it is high risk depends on your employer's written assessment, and the cutting must be controlled, for example with water or on-tool extraction.

I work for different builders on the Coast, in Sydney and in Newcastle. Do I need a new course for each one?

Not always. Each employer decides whether your training meets its duty, and each keeps its own record. Keep your certificate and code handy so a new employer can check them, but be ready in case one asks for a specific course.

Is scoring and snapping tiles better than cutting them?

Where it works for the cut, yes. The code of practice gives scoring and snapping as an example of choosing a lower-dust method. When you must use a power tool, the cutting still has to be controlled, for example with water or on-tool extraction.

Is asphalt a crystalline silica substance?

Yes. The code of practice lists asphalt as an example of a crystalline silica substance. Cutting or grinding it with power tools or machinery is processing.

If I change employers, do I get registered on the Silica Worker Register again?

Yes, if the new employer has you doing high-risk processing. Workers are registered once per employer, within 28 days of starting high-risk processing, and earlier registrations are not updated. Your new employer cannot register you in advance.

Sources

Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.

Related

NSWSilica training in NSW explained: who needs it under s529CD, SafeWork NSW's 11 criteria and the records employers keep. Free online course and test.LandscapersSilica duties and training for NSW landscapers: cutting pavers, retaining wall blocks and natural stone safely. Online course with employer training records.TilersSilica training for tilers in NSW: cutting ceramic and porcelain tiles, grout and wet saws explained. Free course and test, $49 certificate if you pass.BuildersWhat NSW builders must do about crystalline silica: assessments, SWMS, training records and the Silica Worker Register. Online team training with records.SydneySilica training for Sydney workers on high-rise, renovation and tunnel jobs. Built to cover SafeWork NSW's 11 criteria. Free online course and test.Newcastle and the HunterSilica training for Newcastle and Hunter workers in quarries, civil and mining-related work, port maintenance and housing. Free online course and test.

Get your silica training done today

Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.