Silica training for tilers
Ceramic and porcelain tiles, grout and the screeds underneath all contain crystalline silica. How you cut and clean up makes a big difference to the dust you breathe.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Why silica matters for tilers
Safe Work Australia gives ceramic tiles at 5 to 45% crystalline silica and porcelain at 14 to 18%. Grout, mortar and screed sand add more. All of these are crystalline silica substances, because they contain at least 1% crystalline silica.
Tiling tasks that release silica dust include:
- cutting tiles with an angle grinder or dry saw
- wet saw cutting (less dust, but still processing)
- grinding edges and making holes for fittings
- removing old tiles and adhesive with a power tool
- raking out and mixing grout and screeds
- sweeping up dust after cutting.
Score and snap where you can
The silica code of practice gives scoring and snapping tiles as an example of substitution. A manual tile cutter creates far less dust than a grinder. Use it for straight cuts wherever the tile and job allow, and keep power tools for the cuts that need them.
Controls for cutting and grinding
When you use a power tool, the processing must be controlled:
- Wet saws designed for water, with a steady flow and the guard in place. Don't use a spray bottle or sponge on the tile and then cut dry.
- On-tool extraction for grinders and hole saws, with a fitted shroud and an M- or H-class vacuum.
- Cutting outside or in a separate area, away from other workers, so dust doesn't build up in a bathroom or kitchen.
- Respirators as your plan or SWMS says, fit tested at least once a year, and fit checked each time you put one on.
Tile removal and clean-up
Ripping out old tiles with a demolition hammer or grinder can create a lot of dust in a small room. Wet the area where it is safe to do so, use extraction, and keep the room closed off. Clean up with wet methods or an M- or H-class vacuum. Never dry sweep or blow dust out with compressed air.
Engineered stone and tiles
Ceramic wall and floor tiles and porcelain products without resin are not engineered stone under the law, so they are not banned. But they still contain crystalline silica, so the processing rules apply. Engineered stone benchtops, panels and slabs are banned. See the engineered stone ban guide.
Get trained
The free course covers all 11 SafeWork NSW criteria. Tilers should pay close attention to Module 5 on controlled processing and Module 10 on housekeeping. Pass the free test, pay $49, and you get your certificate and employer training record.
Frequently asked questions
Are porcelain tiles banned like engineered stone?
No. Porcelain products without resin are not engineered stone under the WHS Regulation 2025. They still contain crystalline silica, so cutting them must be controlled.
Does a wet saw mean I don't need a mask?
Not always. Processing is controlled when a listed dust control is used and anyone still at risk wears a respirator. Your plan or SWMS says which respirator to use.
Is scoring and snapping really safer?
Yes. The silica code gives scoring and snapping tiles as an example of substitution, because a manual cutter creates much less dust than a power tool.
Can I sweep up after cutting?
Not dry. Use wet methods or an M- or H-class vacuum. Dry sweeping puts fine silica dust back into the air.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.