Locations · NSW

Silica training in NSW

In NSW, a business must give approved crystalline silica training to workers involved in high-risk silica processing, or exposed because of it. This page explains the rule, SafeWork NSW's 11 criteria, the key dates and how our free online silica awareness course maps to each criterion.

Course and test are free. Certificate $49, paid only if you pass.

The NSW silica training rule in one paragraph

Under section 529CD of the Work Health and Safety Regulation 2025 (NSW), a person conducting a business or undertaking (PCBU) must give crystalline silica training to each worker it reasonably believes may be involved in high-risk processing of a crystalline silica substance, or at risk of exposure because of that processing. The Regulation says this must be accredited training or training approved by the regulator, covering the health risks of silica dust and the proper use of the required controls. SafeWork NSW says training counts as approved in NSW if it meets its criteria, and it can be developed in-house or delivered by a third party, so no registered training organisation (RTO) is needed. The PCBU must keep a record of the training while the worker does the work and for 5 years after they leave, ready for inspection.

You may also see it called silica awareness training or a silica course. The silica rules began on 1 September 2024. The 2025 Regulation commenced on 22 August 2025 and kept the same section numbers, from 529A onwards.

Who needs silica training in NSW

A crystalline silica substance is any material that contains at least 1% crystalline silica by weight. That covers concrete, bricks, pavers, blocks, tiles, mortar, grout, fibre cement sheeting, asphalt and most rocks, sands and clays. Solid material is not harmful. The risk comes from the fine dust released when it is worked. Breathing that dust can cause silicosis, which is permanent scarring of the lungs, as well as lung cancer, kidney disease and COPD. Symptoms can take years to appear. If you are worried about your health, talk to your doctor or contact icare.

"Processing" means using power tools or machinery to cut, crush, grind, trim, sand, polish or drill these materials. It also includes quarrying, tunnelling, mechanical screening and digging with roadheaders, plus any process that exposes, or is reasonably likely to expose, someone to silica dust while making or handling them. Processing is high risk when it is reasonably likely to create a risk to someone's health.

Before the work starts, the PCBU must decide in writing whether its processing is high risk. It looks at the task, the type and amount of silica, how often and how long people are exposed, whether dust is likely to go over half the exposure standard, and past monitoring results and incidents. It must ignore respirators and work procedures, and it cannot rely on dust controls alone. If it is unsure, the work is taken to be high risk. Our guide to high-risk crystalline silica processing walks through it step by step.

So the rule does not cover every construction worker. Someone who never works with silica materials, and is not near that work, may not need the training. Trades that often fall inside the rule include:

Every worker who may be exposed to silica dust must also get information and instruction on working safely, even if they don't need the formal training.

Where silica work happens in NSW

The law is the same across the state, but the work looks different from place to place. Our local pages cover the trades and tasks that matter in each area.

SafeWork NSW's 11 silica training criteria, mapped to our modules

SafeWork NSW publishes 11 criteria that approved silica training must meet. Our free online course has one module per criterion, and every test asks at least one question on each.

Criterion What it covers, in plain words Module
1 The health risks of breathing silica dust, including signs and symptoms of silicosis Module 1
2 How to tell if a material contains crystalline silica: the forms named in the Regulation and common products Module 2
3 Reading safety data sheets and the maker's information, and what "processing" means Module 3
4 How processing makes dust, how workers breathe it in, and the exposure standard Module 4
5 What "controlled" processing means under section 529B Module 5
6 The required dust controls, how they work and how to use them Module 6
7 Types of respirators suited to silica dust under AS/NZS 1715 Module 7
8 Checking a respirator complies with AS/NZS 1716 Module 8
9 Fit checks, fit tests and facial hair rules for tight-fitting respirators Module 9
10 Housekeeping and cleaning methods that keep dust out of the air Module 10
11 Risk control plans or SWMS, following them, air monitoring, reporting high results and health monitoring Module 11

The required controls in criterion 6 are isolation, an enclosed operator cabin with high-efficiency air filtration, effective wet dust suppression, effective on-tool extraction and effective local exhaust ventilation. Processing is only "controlled" when at least one of these is used, other controls are in place so far as reasonably practicable, and anyone still at risk wears suitable respiratory protective equipment (RPE).

NSW silica rules in detail

Enforcement in NSW

Silica is a clear enforcement focus. In a release on 18 November 2026, the NSW Government said that since 1 July 2024 there had been at least 4,156 silica-related workplace visits, with 2,063 improvement notices, 520 prohibition notices and 73 penalty notices issued. As at 30 September 2026, 20,004 workers from 922 businesses were on the Silica Worker Register.

The same release announced a new, legally binding code of practice for tunnels and shafts in construction. On 20 November 2026, SafeWork NSW reported that a stone business had been fined $105,000 over the risk of exposure to silica dust at its workplace, from cutting manufactured stone in 2021 and 2022.

Our course, TAFE NSW and accredited units

There is more than one way to meet the NSW training rule. Here is a fair summary.

If your employer, a principal contractor or a site asks for a particular course, do that one. Whatever you choose, the PCBU decides whether the training meets its duty.

How employers check and keep the record

  1. Check the certificate. Each certificate has a unique code in the format SA-2026-XXXX-XXXX and a QR code. Enter the code on our verify page to confirm it. No login is needed.
  2. Read the employer training record. It lists all 11 SafeWork NSW criteria, the module that covers each one, the worker's test result, the date and a verification link.
  3. File it with your silica paperwork. Keep it while the worker does the processing and for 5 years after they leave. SafeWork NSW's risk control plan template has an optional training section, and SafeWork NSW also publishes its own training record form with worker and assessor declarations.

Our guide to keeping a silica training record explains what to store and for how long.

Frequently asked questions

Is silica training mandatory in NSW?

Yes, for workers a PCBU reasonably believes may be involved in high-risk processing of a crystalline silica substance, or exposed because of it. This comes from section 529CD of the WHS Regulation 2025. Other workers who may be exposed must still get information and instruction.

What counts as approved silica training in NSW?

SafeWork NSW says training counts as approved in NSW if it meets its 11 criteria. It can be developed in-house or delivered by a third party. SafeWork NSW also lists TAFE NSW's course as recognised approved training.

Is Silica Academy a registered training organisation?

No. Our certificate is a certificate of completion for non-accredited training. It is not a Statement of Attainment and not CPCSIL3001, CPCSIL4001 or 10830NAT. The course is built to cover SafeWork NSW's 11 criteria, and your employer decides whether it meets their duty.

How long must NSW employers keep silica training records?

While the worker does high-risk processing, and for 5 years after they leave the business. The records must be available for inspection. Air and health monitoring records are kept much longer, for 30 years.

I did silica training before September 2024. Do I need to do it again?

If you completed TAFE NSW's course, 10830NAT, CPCSIL3001 or CPCSIL4001 before 1 September 2024, SafeWork NSW says you don't need to repeat it. For any other earlier training, ask your employer whether it meets their duty.

Does the silica exposure standard change on 1 December 2026?

The name changes, but the number does not. From 1 December 2026 it is called a workplace exposure limit, and it stays at 0.05 mg/m³ averaged over 8 hours.

Who puts workers on the Silica Worker Register?

The PCBU that carries out, directs or allows the high-risk processing registers its own workers. On a site with subcontractors, each subcontractor registers its own workers, not the principal contractor. It must happen within 28 days of the worker starting high-risk processing.

Sources

Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.

Related

High-risk silica processingWhat counts as processing and high-risk processing of crystalline silica in NSW, the written assessment factors, and what follows when work is high risk.Silica Worker RegisterThe NSW Silica Worker Register explained: who must register workers, the 28-day deadline, what information you need and how it links to health monitoring.Silica training recordsWhat a NSW silica training record must show, how long to keep it, SafeWork NSW's optional form, and what's in the Silica Academy employer training record.Is silica training mandatory?Yes, for workers involved in or exposed to high-risk silica processing. Who needs silica training in NSW, what counts as approved and who keeps records.Is online training approved?Online silica training can count as approved in NSW if it meets SafeWork NSW's 11 criteria. What employers must keep, and how our course maps to them.Employers and teamsTrain your NSW team in silica online: single-use codes, instant certificates and an employer training record for each worker, covering all 11 criteria.

Get your silica training done today

Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.