Silica training for demolition workers
Breaking up concrete, brick and masonry creates silica dust fast, and it spreads across the whole site. Here is what NSW silica rules mean for demolition crews.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Why demolition is a silica job
Demolition breaks up concrete, brick, mortar, render and stone, all of which contain crystalline silica. SafeWork NSW lists demolition dust itself at around 3 to 4% crystalline silica, which is still above the 1% threshold. Breaking the material releases respirable crystalline silica (RCS), and the dust keeps moving every time rubble is shifted.
Tasks that release silica dust in demolition include:
- jackhammering and breaking concrete slabs and walls
- saw cutting openings
- strip-outs of tiles, render and masonry
- crushing, loading and dumping rubble
- sweeping and clearing debris.
Planning the work
Demolition is high risk construction work, so a safe work method statement (SWMS) is part of the job. For silica, a SWMS can take the place of a separate silica risk control plan if it covers the same content and is ready before work starts. It must identify the high-risk processing, include the written assessment, and say how controls will be put in place and checked. See risk control plan vs SWMS.
If work isn't being done the way the SWMS says, it must stop and only restart in line with it.
Controls that work in demolition
- Wet suppression at the point of breaking, using equipment designed for it, not a garden hose sprayed nearby.
- Enclosed cabins for excavators and breakers, with doors and windows shut and HEPA filtration.
- Isolation. Exclusion zones keep other workers away from breaking and loading.
- On-tool extraction for saws and smaller breakers where available.
- Respirators for anyone still at risk, fit tested and fit checked, with no facial hair at the seal.
- Clean-up with wet methods or an M- or H-class vacuum. Never dry sweep or use compressed air.
Health checks and the register
If your demolition work is high-risk processing, your employer must provide health monitoring and register you on the Silica Worker Register within 28 days of starting. Air monitoring is required when the business can't be certain whether exposure is over the limit.
Get trained
The free course takes most people 45 to 60 minutes. Focus on Module 4, Module 6 and Module 11. Then do the free test. Pass, pay $49 and you get your certificate and employer training record.
Frequently asked questions
Does demolition dust really contain silica?
Yes. SafeWork NSW lists demolition dust at about 3 to 4% crystalline silica, and the concrete and brick being broken usually contain much more.
Can a SWMS replace a silica risk control plan?
Yes, for high risk construction work, if the SWMS covers what the plan must contain and is prepared before the work starts.
Who keeps my training record?
Your employer. It must keep the record while you do high-risk processing and for 5 years after you leave.
Is hosing down rubble enough?
A hose sprayed nearby is not an effective wet suppression method. Water needs to reach the point where the dust is made, using equipment designed for it.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.