Locations · NT

Silica training in the Northern Territory

The national silica processing rules started in the NT on 1 September 2024. NT WorkSafe says its inspectors will accept documented evidence that workers were trained on silica risks and suitable controls.

Course and test are free. Certificate $49, paid only if you pass.

Important for this state

NT WorkSafe's bulletin says regulator approval may not be needed if you can show documented training on its listed topics, but the law and code still refer to accredited or approved training. Check NT WorkSafe's current guidance. Your employer decides.

The NT's silica rules

The Northern Territory uses the WHS (National Uniform Legislation) Act 2011 and Regulations 2011. The national crystalline silica substance rules started in the NT on 1 September 2024. Businesses must control processing, assess whether it is high risk, prepare a plan or SWMS for high-risk work, train workers and arrange monitoring. The NT also has an approved code of practice, Managing risks of respirable crystalline silica in the workplace.

Who needs silica training in the NT

Workers the business believes may be involved in high-risk processing, or at risk of exposure from it.

What NT WorkSafe accepts

NT WorkSafe's bulletin says inspectors will accept documented evidence that workers were trained on respirable crystalline silica risks and suitable controls, and that regulator approval may not be needed if that evidence can be produced on request. It lists the topics training should cover. Here is where each topic sits in our course:

NT WorkSafe topic Silica Academy module
Identifying crystalline silica products Module 2
Relevant laws and standards Module 5, Module 11
Health hazards and risks Module 1
Exposure standards Module 4
Safety data sheets Module 3
The hierarchy of controls Module 5
Systems for preventing exposure Module 6, Module 10
Risk assessment Module 11

Our modules quote NSW law, which uses the same national section numbers. Keep the certificate and training record as your documented evidence, and check NT WorkSafe's current guidance.

Reporting and records

The exposure standard for respirable crystalline silica is 0.05 mg/m³ over 8 hours. See our exposure standard answer.

Frequently asked questions

Does silica training need regulator approval in the NT?

NT WorkSafe's bulletin says approval may not be needed if you can show documented training on silica risks and controls. The law and code still refer to accredited or approved training, so check NT WorkSafe's current guidance.

What topics should NT silica training cover?

Identifying crystalline silica products, laws and standards, health hazards, exposure standards, safety data sheets, the hierarchy of controls, systems for preventing exposure, and risk assessment.

How fast must exceedances be reported in the NT?

Within 14 days of the business receiving the air monitoring results.

How should engineered stone dust be handled in the NT?

The NT EPA says engineered stone dust and slurry should be handled like asbestos-containing material.

Sources

Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.

Related

LocationsSilica training rules in every Australian state and territory: what each regulator accepts, where our free online course fits, and NSW city guides.NSWSilica training in NSW explained: who needs it under s529CD, SafeWork NSW's 11 criteria and the records employers keep. Free online course and test.High-risk silica processingWhat counts as processing and high-risk processing of crystalline silica in NSW, the written assessment factors, and what follows when work is high risk.Silica exposure standardThe exposure standard for respirable crystalline silica is 0.05 mg/m³ over 8 hours. From 1 December 2026 it's called a workplace exposure limit, same value.Silica training recordsWhat a NSW silica training record must show, how long to keep it, SafeWork NSW's optional form, and what's in the Silica Academy employer training record.

Get your silica training done today

Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.