Silica training in Wollongong and the Illawarra
Heavy industry, quarries, roadworks and homes on steep coastal blocks all put silica dust in the air across the Illawarra. Our free online silica course covers SafeWork NSW's 11 criteria, and you can do it on your phone at a time that suits your shifts.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Heavy industry maintenance
Maintenance at heavy industrial sites, such as those around Port Kembla, often means working on concrete and masonry. Shutdowns bring in extra crews and contractors, and the silica tasks are much the same from job to job:
- breaking out old concrete plinths, floors and footings
- core drilling and drilling anchor holes
- cutting, grinding and chasing masonry
- knocking down old structures
- cleaning dust off plant, floors and ledges
Demolition workers and specialist concrete cutting and drilling businesses often do this work.
Cleaning up after the job
Dust settles everywhere on maintenance jobs, and cleaning it up can count as processing in its own right. The code of practice sets out what to do and what to avoid:
- clean up slurry and settled dust every day, following a cleaning schedule
- use low-pressure water, wet sweeping or an M- or H-class vacuum
- do not use compressed air, dry sweeping or a general-purpose vacuum on surfaces or clothing
The official-sounding "industrial vacuum" label is not enough on its own. Check that the unit is M- or H-class before you use it on silica dust.
Civil works and building on the escarpment
The Illawarra squeezes roads and suburbs into a narrow strip between the escarpment and the sea. Roadworks, retaining walls and homes often go onto steep ground. That means cutting into rock for footings and driveways, breaking and drilling rock, and building walls from stone, brick and block. Our page for stonemasons covers work with natural stone.
Wet cutting is common on these jobs, but it only counts as a control if it is effective. The code of practice says to use tools designed for water, with a steady flow that is usually at least 0.5 litres a minute and a nozzle that suits the tool. Workers should not be able to turn the water down or off. Spray bottles, sponges and garden hoses are not good enough. Manage the slurry, and watch for electrical and slip hazards.
Quarries in the region
The region's quarries supply rock for roads, concrete and building. Quarrying, mechanical screening and crushing are all processing under the Regulation. Quarry businesses need the same written assessment, controls, training and records as any other business doing high-risk processing.
What Illawarra employers must have in place
Before high-risk processing starts, a business needs a written assessment and a silica risk control plan, or a SWMS on high-risk construction work. The plan has to be easy to find and easy to understand, and workers must follow it. If the work moves away from the plan, it must stop and only start again in line with it. Our guide to silica risk control plans and SWMS explains which one you need.
Controls also need regular review. The code of practice says to review them when they are not working, for example when air monitoring shows results at or above half the exposure standard, or after a health monitoring report that shows a problem. Review them before big changes to the work, when a health and safety representative asks, and at least every 5 years. Workers who need training must get it, and the record must be kept for 5 years after they leave. More detail is on our NSW silica training page.
Doing the course from the Illawarra
The course is fully online, so you can do it at home in Wollongong, Shellharbour or Kiama, or anywhere with a mobile signal. Shift workers can fit the 11 modules around their roster. The test has 20 questions, you need 16 to pass, and you can resit it for free.
Frequently asked questions
I work on shutdowns at an industrial site. Does the silica training rule apply to me?
It applies if your employer reasonably believes you may be involved in high-risk processing, or exposed because of it. Breaking out concrete, core drilling and grinding masonry are common examples. Any worker who may be exposed must at least get information and instruction.
Can I take my dusty work clothes home to wash?
No. The code of practice says dusty workwear should never go home. Vacuum your clothes with an M- or H-class vacuum and use a laundry service instead.
Do I still need a respirator if I am wet cutting?
Possibly. Processing is only controlled when a dust control such as water is used and anyone still at risk is given a respirator and wears it. Your employer's plan should say which tasks need respiratory protection.
Are porcelain and sintered stone banned like engineered stone?
Not if they contain no resin. They are still crystalline silica substances, so cutting or grinding them is processing and must be controlled. Finished items made from natural stone are not banned either.
Do I need to go to a venue in Wollongong to sit the silica test?
No. The course and the test are both online, so there is no venue and no booking. You can do them on a phone, tablet or computer.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.