What is the exposure standard for silica?
The workplace exposure standard for respirable crystalline silica is 0.05 mg/m³ as an 8-hour time-weighted average. From 1 December 2026 it is called a workplace exposure limit, at the same value.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
The short answer
0.05 mg/m³, as an 8-hour time-weighted average (TWA), measured as the respirable fraction. It applies to all four forms of crystalline silica: quartz, cristobalite, tridymite and tripoli. No one may be exposed above it.
The change on 1 December 2026
Safe Work Australia's workplace exposure standards (WES) become workplace exposure limits (WEL) from 1 December 2026, and NSW adopts the new list on the same date. Safe Work Australia says renaming standards to limits doesn't change obligations. The value for respirable crystalline silica stays at 0.05 mg/m³.
Long shifts
The limit assumes an 8-hour day and a 40-hour week. It may need to be lowered for shifts longer than 8 hours, weeks over 40 hours, or less than 16 hours between shifts. It is never raised for shorter shifts. SafeWork NSW notes adjustment for extended shifts such as 12-hour shifts.
How the standard is used
- High-risk assessment: one factor is whether airborne silica is reasonably likely to exceed half the standard.
- Air monitoring: required when the business isn't certain exposure is below the standard. Samples are taken in the breathing zone, outside any respirator.
- Reporting: results above the standard must go to SafeWork NSW within 14 days, even if workers wore respirators.
- Reviewing controls: the silica code says controls should be reviewed when monitoring shows levels at or above half the standard.
Learn more in Module 4 of the free course.
Frequently asked questions
Is the silica limit changing in December 2026?
The name changes to workplace exposure limit from 1 December 2026. The value for respirable crystalline silica stays at 0.05 mg/m³ over 8 hours.
Does wearing a respirator mean I'm under the limit?
Not necessarily. Air samples are taken outside the respirator, and RPE only counts towards compliance when all higher-order controls are in place and it is worn correctly.
Who do we report exceedances to?
SafeWork NSW, through its online form, within 14 days of receiving the results.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.