Silica training for concreters
Cutting, grinding, coring and chasing concrete are some of the dustiest jobs on a NSW site. Here is what the silica rules mean for concreters, and how to get trained online.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Why silica matters for concreters
SafeWork NSW lists concrete and mortar at 25 to 70% crystalline silica. Safe Work Australia gives a lower figure for concrete, so always check the safety data sheet (SDS) for the product you use. Either way, concrete is well over the 1% that makes a material a crystalline silica substance (CSS) under the WHS Regulation 2025.
A cured slab sitting there is not the problem. The danger starts when you break it up. These everyday concreting tasks release respirable crystalline silica (RCS):
- saw cutting control joints and openings
- grinding and polishing slabs
- core drilling for services
- chasing walls and floors for conduit
- scabbling, scarifying and jackhammering
- cleaning up dried slurry and dust.
RCS is too fine to see in normal light. A job can look clean and still put silica dust in the air you breathe.
Is your work high-risk processing?
Your employer (the PCBU) must assess each task in writing. The assessment looks at the task, how much silica the material contains, how often and how long you do it, past monitoring results, and whether dust levels are likely to exceed half the exposure standard. Respirators are left out of that assessment. If the business is unsure, the law treats the work as high risk.
Dry cutting, grinding indoors and long or repeated jobs all push the risk up. When work is high risk, the business needs a silica risk control plan or a safe work method statement (SWMS), must train you, provide health monitoring, and register you on the Silica Worker Register within 28 days. See what counts as high-risk processing.
Controls that suit concrete work
All processing of concrete must be controlled. That means at least one of the listed dust controls, plus a respirator for anyone still at risk.
- Wet cutting. Use saws designed for water, with a steady flow (the silica code says usually at least 0.5 litres per minute). Don't turn the water down to keep the job clean.
- On-tool extraction. Grinders, chasers and drills need a shroud that fits, a good hose and an M- or H-class vacuum.
- Isolation. Keep other trades away while you cut, and schedule dusty work when fewer people are around.
- Respirators. Wear the respirator your plan or SWMS names. Tight-fitting masks need a fit test at least once a year, a fit check every time you put them on, and no facial hair where they seal.
- Clean-up. Shovel slurry before it dries. Use wet methods or an M- or H-class vacuum. Never dry sweep or use compressed air.
Course modules that matter most
Every module counts towards the 11 criteria, but concreters get the most out of:
- Module 4: how silica dust is made and the exposure limit
- Module 6: using the five dust controls properly
- Module 9: fit testing, fit checking and facial hair
- Module 10: housekeeping and slurry
Getting certified
The course and test are free. The test has 20 questions, and you need 16 to pass. If you pass, the certificate costs $49 and comes with an employer training record that lists all 11 SafeWork NSW criteria. Your boss can check it at verify.
Frequently asked questions
Do concreters need silica training in NSW?
Your employer must train you if it reasonably believes you may be involved in high-risk processing of concrete, or exposed because of it. Most concreting tasks process a crystalline silica substance, so the assessment decides whether the work is high risk.
Is wet cutting enough on its own?
Wet cutting is one of the listed controls, but processing is only controlled when all three parts are met. Anyone still at risk must also be given a respirator and wear it.
Does grinding a slab count as processing?
Yes. Grinding a crystalline silica substance with a power tool is listed as processing in section 529A of the WHS Regulation 2025.
Can my employer pay for my certificate?
Yes. Employers can buy single-use codes for their team, so you complete the course and test and get your certificate without paying. See for employers.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.