Silica training for bricklayers
Bricks, blocks, mortar and pavers all contain crystalline silica. Every cut with a power saw can release fine silica dust, so here is what NSW rules mean for brickies and blocklayers.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Why silica matters for bricklayers
Brick and block work involves a lot of materials that contain crystalline silica. SafeWork NSW gives these typical levels:
| Material | Typical crystalline silica (SafeWork NSW) |
|---|---|
| Brick | up to 30% |
| Calcium-silicate bricks | 50 to 55% |
| Concrete and mortar | 25 to 70% |
| Sand | 70 to 100% |
Safe Work Australia's figures differ for some materials, so check the safety data sheet for the actual product. All of these are well above the 1% threshold, so they are crystalline silica substances under the law.
The tasks that release silica dust in bricklaying include:
- cutting bricks, blocks and pavers with a power saw
- chasing and drilling masonry
- grinding back mortar or raking joints with power tools
- mixing dry mortar and cleaning up.
Substitution comes first
The best control removes the dust before it starts. The silica code of practice gives a bricklaying example: use a hand saw for autoclaved aerated concrete (AAC) instead of a power saw. Other ways to cut down dust include ordering cut-to-size units, planning layouts to reduce cuts, and using a bolster where it suits the job and doesn't create its own dust.
Controls when you do cut
When you need a power saw, the processing must be controlled:
- Wet cutting with a saw designed for water and a steady flow. A spray bottle or hose on the brick doesn't count.
- On-tool extraction with a shroud and an M- or H-class vacuum for dry-cut saws and grinders that are designed for it.
- Isolation. Set up the cutting station away from other trades and downwind where possible.
- Respirators as your plan or SWMS requires, fit tested at least once a year and fit checked every time.
- Clean-up with wet methods or an M- or H-class vacuum. No dry sweeping of cutting dust.
When the work is high risk
Your employer must assess your tasks in writing, without counting respirators. Frequent dry cutting, work in enclosed areas and long days on the saw raise the risk. If the business is unsure, the processing is taken to be high risk, and you must be trained, given health monitoring and registered on the Silica Worker Register within 28 days.
Modules to focus on
- Module 2: which materials contain crystalline silica
- Module 5: what controlled processing means
- Module 6: using the five dust controls
Then take the free silica test. Pass, pay $49 and you get your certificate and an employer training record straight away.
Frequently asked questions
Is cutting bricks with a power saw processing?
Yes. Cutting a crystalline silica substance with a power tool is processing under section 529A. It must be controlled, and your employer must assess whether it is high risk.
What is the safest way to cut AAC blocks?
The silica code of practice gives using a hand saw for autoclaved aerated concrete as an example of substitution. It removes most of the dust a power saw would create.
Do I need a new fit test if I change masks?
Yes. Fit testing is needed for each new make, model, style or size of tight-fitting respirator, and at least once a year.
Does the course count for my White Card?
No. A White Card is general construction induction. This course is separate, non-accredited silica training built to SafeWork NSW's 11 criteria.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.