Silica training for landscapers
Pavers, retaining wall blocks, sandstone and natural stone all contain crystalline silica. Cutting them with a power saw is processing under NSW law, even in a backyard.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Silica in landscaping
Landscaping uses many crystalline silica substances:
- concrete pavers, blocks and retaining wall units
- natural stone, such as sandstone (70 to 100% crystalline silica according to SafeWork NSW) and granite (20 to 45%)
- concrete footings, edging and paths
- sand, rock and some soils.
Tasks that release silica dust include cutting pavers and blocks, grinding and shaping stone, drilling and core holes, breaking old concrete, and sweeping up cutting dust.
Less dust from the start
Plan layouts to cut fewer pavers, order cut-to-size where you can, and use a manual paver splitter for straight splits, which creates far less dust than a power saw. When you do need a saw, the processing must be controlled.
Controls for landscape crews
- Wet saws designed for water, with steady flow. Wetting the paver with a hose and cutting dry doesn't count.
- On-tool extraction with an M- or H-class vacuum for grinders and saws designed for it.
- Isolation: cut away from clients, neighbours and other workers, with a dedicated cutting area.
- Respirators for anyone still at risk, fit tested at least once a year, and fit checked every time.
- Clean-up: hose slurry off hard surfaces with low pressure before it dries, and never dry sweep or use a blower on cutting dust.
Your duties as an employer
As a PCBU you must assess processing in writing, control it, and for high-risk work prepare a silica risk control plan or SWMS, train workers, keep training records for 5 years after they leave, provide health monitoring, and register workers on the Silica Worker Register within 28 days.
Rollout checklist
- List every task on your sites that processes a crystalline silica substance.
- Assess each task in writing and decide whether it is high risk (if unsure, treat it as high risk).
- Make sure every task is controlled: at least one listed dust control, plus respirators for anyone still at risk.
- Prepare a silica risk control plan or SWMS before high-risk work starts, with your workers.
- Train workers to the approved standard and keep the records.
- Arrange air monitoring where exposure is uncertain and health monitoring for high-risk workers.
- Register high-risk workers on the Silica Worker Register within 28 days.
Read more: what counts as high-risk processing · silica risk control plan or SWMS · the Silica Worker Register · silica training in NSW
Training your crew
Email support@silicaacademy.com.au with your business name and how many workers you need to train. We invoice your business and send single-use codes. Each worker does the free course and test, enters their code at checkout, and gets a certificate and employer training record straight away. You can check every certificate at verify. See for employers for the full process.
Frequently asked questions
Is cutting pavers in a backyard really covered?
Yes. Cutting a crystalline silica substance with a power saw is processing under the WHS Regulation 2025, wherever the work happens.
Do I need a silica risk control plan for small jobs?
If the processing is high risk, you need a plan or a SWMS before it starts. The written assessment decides, and if you're unsure, it is taken to be high risk.
Is a manual paver splitter better than a saw?
For straight splits it usually creates much less dust. Substituting a lower-dust method is higher up the hierarchy of controls than relying on respirators.
Can apprentices use the course?
Yes. It's written in plain English, and each apprentice gets their own certificate and training record.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.