Silica training for labourers
Labourers often do the clean-up, carry the saws and work right next to the cutting. That can mean as much silica dust as the trade doing the job.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Why labourers are exposed
You don't have to hold the grinder to breathe the dust. Labourers are often exposed by:
- working next to people cutting, grinding or drilling
- sweeping, shovelling and bagging dust and rubble
- cleaning up dried slurry
- jackhammering or breaking concrete
- cutting pavers, blocks or kerbs themselves.
NSW law covers this. Your employer must train workers who may be involved in high-risk processing, and workers who may be exposed because of it. Everyone who may be exposed must get information and instruction.
Clean-up is processing too
Sweeping or vacuuming silica dust can itself count as processing. That means clean-up must be controlled, like any other dusty task:
- use wet methods or an M- or H-class vacuum
- never dry sweep or use compressed air
- shovel slurry while it is wet, before it dries into dust
- wear the respirator your plan or SWMS names
- bag dust and keep waste damp or sealed.
Keep out of the dust cloud
Stay out of cutting zones unless you are needed. Ask for barriers or a separate cutting area if dust is drifting where you work. If you can see dust, there is fine silica dust you can't see as well.
Look after your gear and your family
Tight-fitting respirators need a fit test at least once a year and a fit check every time you put them on, with no facial hair where they seal. Vacuum dusty clothes with an M- or H-class vacuum, use a laundry service if provided, and never take dusty workwear home.
Get trained online
The free course is written in plain English for workers like you. It covers all 11 SafeWork NSW criteria in about 45 to 60 minutes. Labourers get a lot from Module 10: housekeeping and Module 9: fit testing. Then take the free test. Pass, pay $49 and you get your certificate and employer training record.
Working through labour hire? See labour hire silica duties.
Frequently asked questions
I only clean up. Do I need silica training?
If you may be exposed because of high-risk processing, your employer must give you crystalline silica training. Cleaning up silica dust can itself count as processing.
Can I use a normal vacuum?
No. Use an M- or H-class vacuum. General-purpose vacuums can blow fine dust out through the exhaust.
What if I have a beard?
There must be no facial hair where a tight-fitting mask seals. Ask about a loose-fitting powered respirator hood or helmet, which doesn't need a fit test.
Will my employer accept an online course?
In NSW, training counts as approved if it meets SafeWork NSW's criteria, and it can be delivered by a third party. Your employer decides and keeps the record.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.