Locations · NSW

Silica training in Newcastle and the Hunter

Quarries, civil projects, mining-related work, port maintenance and new housing all create silica dust across Newcastle and the Hunter. You can do our free online silica course from home or between rostered shifts, with no trip to Sydney.

Course and test are free. Certificate $49, paid only if you pass.

Quarries and crushing plants

Quarries across the Hunter dig, crush and screen rock and sand for building and roads. Under the Regulation, quarrying a crystalline silica substance is processing. So is crushing it with machinery or screening it mechanically. Loading and hauling the rock is a known source of dust as well. SafeWork NSW lists sand and sandstone at 70 to 100% crystalline silica and granite at 20 to 45%, so most quarry products are well over the 1% line.

Many quarry workers spend the shift in a loader, excavator or truck cab. An enclosed operator cabin with high-efficiency air filtration is one of the dust controls named in the Regulation. The code of practice says it should work with the doors and windows shut, hold a positive pressure of 50 to 200 Pa, have a real-time pressure monitor with an alarm, and use HEPA H13 or H14 filters on the air intake. A cab with a propped-open door does not do that job. Our page for excavator operators covers plant work in more detail.

Mining in the Hunter brings a lot of civil and construction work with it, such as haul roads, drainage, earthworks, concrete foundations and plant upgrades. Drilling, rock breaking and cutting concrete on these jobs is processing. Civil businesses can read our page for civil contractors.

Some coal industry businesses are exempt from the Silica Worker Register, because their workers get health monitoring under the Coal Industry Act. Other businesses doing high-risk processing must register their workers within 28 days. If you are not sure which rules cover your site, ask your employer, or read our Silica Worker Register guide.

Long rosters matter too. The exposure standard is 0.05 mg/m³ averaged over 8 hours. SafeWork NSW notes it is adjusted for extended shifts, such as 12-hour shifts, and the figure may need to be lowered for long shifts or short breaks between shifts. It is never raised for short shifts.

Port and industrial maintenance

The port and the industrial sites around Newcastle need regular maintenance. Crews cut, grind and core drill concrete and masonry, break out old floors and footings, and clean up the dust afterwards. If your job includes abrasive blasting, the abrasive itself must not contain more than 1% crystalline silica. Blasting with anything above that is prohibited.

Housing across the region

New homes and renovations around Newcastle, Lake Macquarie, Maitland and the Lower Hunter involve the same silica tasks as anywhere else in NSW. Bricklayers cut brick and block, concreters cut and grind slabs, and tilers cut tiles and stone. Home builders in the region have the same duties as a big civil contractor.

What Hunter employers must have in place

Before high-risk processing starts, a business needs a written assessment and a silica risk control plan, or a SWMS on high-risk construction work. After that:

icare recommends screening every 12 months and offers subsidised screening. Our guide to silica RPE and fit testing explains the respirator rules, and the NSW silica training page covers the rest.

Training from anywhere in the Hunter

Our course runs online, so there is no drive to Sydney or to a training room. If you work a roster, you can do the modules on your days off or between shifts, on your phone or a computer. Most people finish in 45 to 60 minutes, and the test takes about 15 minutes with no time limit.

Frequently asked questions

Does quarry work count as silica processing?

Yes. The Regulation lists quarrying a crystalline silica substance as processing, along with mechanical screening and crushing with machinery. Whether it is high risk depends on your employer's written assessment.

I work 12-hour shifts. Is the silica exposure standard different for me?

The standard is 0.05 mg/m³ averaged over 8 hours. SafeWork NSW notes it is adjusted for extended shifts like 12-hour shifts, which can mean a lower figure applies to you. From 1 December 2026 it is called a workplace exposure limit, with the same value.

Do I still need silica training if I work in an enclosed cab?

If your employer reasonably believes you may be involved in high-risk processing, or exposed because of it, yes. A filtered, pressurised cab is a dust control, but it does not remove the training duty. You also need to know how to work safely when you step out of the cab.

Are coal mine workers on the Silica Worker Register?

Businesses that provide health monitoring under the Coal Industry Act are exempt from registering. Other businesses carrying out high-risk processing must register their workers within 28 days. Ask your employer which applies to your site.

Can we use sand for abrasive blasting during maintenance?

No. Abrasive blasting with material that contains more than 1% crystalline silica is prohibited. Blasting concrete or masonry with another abrasive still creates silica dust, so that work must be controlled.

Sources

Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.

Related

NSWSilica training in NSW explained: who needs it under s529CD, SafeWork NSW's 11 criteria and the records employers keep. Free online course and test.Excavator operatorsSilica training for excavator and plant operators in NSW: enclosed cabins, HEPA filters and rock. Free course and test, $49 certificate if you pass.Civil contractorsSilica duties for NSW civil contractors: roadworks, excavation, kerbs and saw cutting. Assessments, monitoring, the register and team training with records.RPE and fit testingRespirators for silica dust in NSW: P1, P2 and P3 filters, protection factors, AS/NZS 1716 checks, yearly fit testing, fit checks and facial hair rules.Silica Worker RegisterThe NSW Silica Worker Register explained: who must register workers, the 28-day deadline, what information you need and how it links to health monitoring.

Get your silica training done today

Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.