Silica risk control plan vs SWMS
High-risk silica processing needs a written plan before work starts. On construction sites, a safe work method statement can do the job, if it covers the same ground.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
The silica risk control plan
Section 529CB of the WHS Regulation 2025 says that before high-risk processing starts, the PCBU must prepare a silica risk control plan (SRCP). It must:
- identify all high-risk processing at the workplace
- include the written assessment that found it high risk (section 529CA)
- set out the control measures, and how they will be put in place, monitored and reviewed
- be readily accessible and easy to understand.
The silica code of practice says the plan should be developed with the workers involved and their health and safety representatives. The maximum penalty for not having a plan is 73 penalty units for an individual and 364 penalty units for a body corporate.
When a SWMS can replace the plan
On construction work, section 529CB(3) says you don't need a separate SRCP if:
- the processing is also high risk construction work
- a safe work method statement (SWMS) is prepared before the work starts
- the SWMS meets the content requirements of section 529CB(2).
High risk construction work includes work "carried out in an area that may have a contaminated or flammable atmosphere" (section 291). The silica code says silica processing may qualify if respirable crystalline silica may contaminate the work atmosphere. Several SWMS can together cover the content an SRCP would need.
What a good silica plan or SWMS covers
Using the SafeWork NSW template as a guide:
| Part | What it covers |
|---|---|
| Part A | Dates, business details, the processes, worker numbers and consultation |
| Part B | The written high-risk assessment, attached |
| Part C | A controls table: location, task, controls, work practices, respiratory protection, how controls are put into daily work, and a review log |
| Part D | Training (optional) |
| Declaration | Signed by the business |
The template is optional, but it shows the level of detail expected.
Following the plan: stop and resume
Section 529CC (and section 300 for a SWMS) requires the business to:
- make the plan available to all workers and give it to them before they start
- stop the work immediately, or as soon as it is safe, if it isn't being done in line with the plan
- resume only in line with the plan
- review the plan when control measures are revised.
In practice, workers should know the plan well enough to notice when the water feed fails, the extraction isn't connected or the wrong respirator is being used, and to stop.
Keeping the plan current
Review controls, and update the plan, when they aren't working (including air monitoring at or above half the exposure standard, or an adverse health report), before significant changes, when a health and safety representative asks, and at least every 5 years. Part D of the template can record training, which is a good place to file each worker's training record.
Related reading: what counts as high-risk processing · silica duties for builders · silica training in NSW
Frequently asked questions
Do I need both a SWMS and a silica risk control plan?
Not for high risk construction work, if the SWMS meets the plan's content requirements and is prepared before work starts.
Who should write the plan?
The PCBU is responsible, and the silica code says it should be developed with the workers doing the work and their health and safety representatives.
What happens if workers don't follow the SWMS?
The work must stop immediately, or as soon as it's safe, and only resume in line with the SWMS.
Is the SafeWork NSW template mandatory?
No. It is optional, but your plan must contain everything section 529CB requires.
How often should the plan be reviewed?
When controls aren't working, before significant changes, when a health and safety representative asks, and at least every 5 years.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.