Silica training for excavator operators
Digging, ripping and loading sandstone, rock and spoil can put silica dust in the air around your machine. Your cabin is one of your best controls, if it is set up and used properly.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Where the silica comes from
Rock, sand and soil can contain a lot of crystalline silica. SafeWork NSW lists sand and sandstone at 70 to 100%. Plant operators can be exposed when they:
- excavate, rip or break rock
- load, haul and dump spoil
- drill or use roadheaders
- work near crushing and screening plant
- sweep or clean out a dusty cabin.
The WHS Regulation 2025 counts using mechanical plant to crush, cut, grind or drill a crystalline silica substance as processing. Using roadheaders to excavate, quarrying, mechanical screening and tunnelling are also listed.
Your cabin as a control
A fully enclosed operator cabin fitted with a high-efficiency air filtration system is one of the five listed dust controls. The silica code of practice says it should have:
- doors and windows kept shut while working
- positive pressure of 50 to 200 pascals, so dust is pushed out
- a real-time pressure monitor with an alarm
- HEPA H13 or H14 filters on the air intake and, where possible, on recirculated air.
An open window on a hot day, a broken door seal or a clogged filter lets dust straight in. Report problems, and don't keep working with a pressure alarm going off.
Getting in and out
Dust settles on steps, floors and seats. Keep the cabin clean with an M- or H-class vacuum or wet wiping, never compressed air. Brush-off and boot cleaning outside the cab helps keep dust from being carried in. If you need to leave the cabin in a dusty area, wear the respirator your plan or SWMS names.
When it is high risk
Your employer must assess the processing in writing, without counting respirators or relying on the listed controls. If it is high risk, you need training, health monitoring, and registration on the Silica Worker Register within 28 days. Air monitoring is needed when exposure is uncertain.
Get trained
Operators get the most from Module 6: the five dust controls, which covers cabin requirements, and Module 3: what counts as processing. The course and test are free, and the certificate is $49 if you pass.
Frequently asked questions
Does an air-conditioned cab count as an enclosed cabin?
Only if it is fully enclosed and fitted with a high-efficiency air filtration system. The silica code describes positive pressure of 50 to 200 pascals, a pressure monitor with alarm, and HEPA H13 or H14 filters.
Do I need a respirator inside the cabin?
That depends on your employer's assessment and your SWMS. Processing is controlled when anyone still at risk wears a respirator, so follow your plan.
Is excavating sandstone processing?
Excavating a crystalline silica substance with mechanical plant can be processing. Using roadheaders, quarrying, screening and tunnelling are listed in the regulation.
Can I blow out the cab with compressed air?
No. Compressed air puts silica dust back into the air. Use an M- or H-class vacuum or wet wiping.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.