Guide · NSW

The NSW Silica Worker Register explained

Since 1 October 2025, NSW businesses doing high-risk silica processing must register their workers with SafeWork NSW within 28 days. Here is who registers, what you need and the common traps.

Course and test are free. Certificate $49, paid only if you pass.

What the register is for

The Silica Worker Register (SWR) is a SafeWork NSW record of workers who carry out high-risk processing of crystalline silica substances, across all industries. The NSW Government says it supports the ongoing health monitoring of these workers. It is set out in Part 8A.4 of the Work Health and Safety Regulation 2025 (sections 529K to 529R) and started on 1 October 2025.

As at 30 September 2026, 20,004 workers from 922 businesses were on the register, mostly in construction and manufacturing.

Who must register whom

A person conducting a business or undertaking (PCBU) that carries out high-risk processing, or directs or allows it, must register its own workers who do that processing. Some points to note:

Labour hire arrangements can be complicated. Confirm with SafeWork NSW which business registers the workers in your arrangement.

The 28-day deadline

Workers must be registered "as soon as reasonably practicable and no more than 28 days" after they start high-risk processing (section 529L(3)). You can't register workers in advance, before the processing starts. Failing to register is a penalty notice offence.

What information you need

Part Information required
The worker (529M) Name, date of birth, phone, email
The PCBU (529N) Name or business name, industry, ABN, phone, email, business address, contact person, workers compensation policy number (if a policy is required)
The processing (529O) Location, start date, whether tunnel construction is involved, and the project name if so
Health monitoring (529P) Any health monitoring provider engaged in the past 12 months, with name and ABN, unless it was the Dust Diseases Authority (icare)

Registration is done through SafeWork NSW's online notification.

Workers who stopped before 1 October 2025

The SafeWork NSW page has been inconsistent on this. One line suggests workers who stopped high-risk processing before 1 October 2025 need registering, while the FAQ on the same page says they don't. If this affects your business, check directly with SafeWork NSW (13 10 50).

How the register fits with your other duties

Registration is one of several duties that apply once processing is high risk:

  1. a written assessment showing the processing is high risk (how to assess)
  2. a silica risk control plan or SWMS before work starts (plan vs SWMS)
  3. crystalline silica training, with records kept for 5 years after the worker leaves (training records)
  4. air monitoring when exposure is uncertain, and reporting results over the limit within 14 days
  5. health monitoring for workers doing the processing
  6. registration on the SWR within 28 days.

A simple habit helps: when a new worker starts high-risk processing, train them, book their health monitoring and register them in the same week.

Frequently asked questions

When did the Silica Worker Register start?

1 October 2025, under Part 8A.4 of the Work Health and Safety Regulation 2025 (NSW).

Can I register workers before they start?

No. Workers can't be registered in advance. Register them as soon as reasonably practicable, and within 28 days of starting high-risk processing.

Does the principal contractor register subcontractors' workers?

No. Subcontractors register their own workers.

What if a worker moves to a new employer?

Workers are registered once per employer, so the new employer registers them when they start high-risk processing there.

Is registering workers the same as training them?

No. Registration and training are separate duties. Workers doing high-risk processing must be trained and registered.

Sources

Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.

Related

High-risk silica processingWhat counts as processing and high-risk processing of crystalline silica in NSW, the written assessment factors, and what follows when work is high risk.NSWSilica training in NSW explained: who needs it under s529CD, SafeWork NSW's 11 criteria and the records employers keep. Free online course and test.Labour hireSilica duties for NSW labour hire providers and hosts: who trains, who registers and which records to keep. Online training with an employer training record.BuildersWhat NSW builders must do about crystalline silica: assessments, SWMS, training records and the Silica Worker Register. Online team training with records.Employers and teamsTrain your NSW team in silica online: single-use codes, instant certificates and an employer training record for each worker, covering all 11 criteria.

Get your silica training done today

Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.