Silica training in Sydney
Sydney's towers, renovations and tunnels create a lot of silica dust, from core drilling slabs to cutting through sandstone. If you do high-risk silica work, your employer must give you approved silica training, and you can do our course online without crossing the city.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
High-rise and apartment work
Much of Sydney's building work goes up, not out. Towers and apartment blocks mean a lot of concrete, and much of it is cut and drilled indoors, in risers, stairwells and basements where dust has nowhere to go. Common Sydney tasks that create fine silica dust include:
- core drilling and saw cutting slabs and walls for plumbing, electrical and fire services
- chasing walls and grinding concrete floors during fit-outs
- cutting fibre cement sheeting, bricks and blocks
- cutting tiles and stone for apartment kitchens and bathrooms
- breaking out concrete when layouts change
Sydney also sits on sandstone. Digging basements, drilling rock and cutting sandstone blocks all count as processing a crystalline silica substance, so excavation crews are in the picture too.
Renovations and strip-outs
Sydney has many older houses, terraces, units and offices, and renovating them means stripping out tiles, render, mortar and concrete. Doing that with power tools is processing, and cleaning up afterwards can count as processing too. The silica code of practice says not to dry sweep, use compressed air or use a general-purpose vacuum. Use wet methods or an M- or H-class vacuum instead. Our page for demolition workers covers strip-out tasks in more detail.
Old engineered stone benchtops need extra care. Engineered stone has been banned since 1 July 2024, but benchtops installed before then can be removed, repaired or given minor changes. The work must be controlled, and SafeWork NSW must get written notice before it starts. A benchtop that is left alone is not a health risk, and there is no need to remove it. See our engineered stone ban guide.
Tunnels under the city
Sydney's major road and rail tunnel projects, such as WestConnex and Sydney Metro, show how much of the city's transport is built underground. Under the Regulation, tunnelling through a crystalline silica substance is processing in its own right, and so is digging it out with roadheaders. Crushing, loading and hauling rock and tunnel spoil also creates dust. When a business registers workers on the Silica Worker Register, it must say whether tunnel construction is involved and, if so, name the project.
On 18 November 2026, the NSW Government announced a new, legally binding Tunnels and Shafts in Construction Code of Practice, replacing the 2006 code.
The Minister described an approved code like this as "a legally enforceable minimum standard". SafeWork NSW had also run a tunnel compliance operation from late September to early November 2026. Since 1 July 2026, NSW businesses must follow approved codes, or manage the risk in a way that is equal to or better than the code. If you work underground, ask your employer how the new code affects your site. Our page for tunnellers has more.
What Sydney employers need in place
On a busy Sydney site, several businesses may be cutting and drilling at once. Each one whose workers do high-risk processing needs to:
- assess its processing in writing before work starts
- prepare a silica risk control plan before work starts, or a SWMS on high-risk construction work
- control the dust, for example with on-tool extraction, wet cutting or isolation, and provide respirators to anyone still at risk
- train workers involved in high-risk processing, or exposed because of it, and keep the record for 5 years after they leave
- register its own workers on the Silica Worker Register within 28 days
Businesses that cut and core concrete can read our page for concrete cutting and drilling businesses. The full rules are on our NSW silica training page.
Training online from anywhere in Sydney
You don't need to get to a classroom. The course runs in your phone's browser, so you can do a module on public transport, on a break or at home. Most people finish all 11 modules in 45 to 60 minutes, and the test takes about 15 minutes with no time limit. Once you pass and pay, your certificate is ready straight away, with a code your site manager can check on our verify page.
Frequently asked questions
Does tunnel work in Sydney need a different silica course?
The training rule in section 529CD is the same for tunnel workers as for anyone else doing high-risk processing. Tunnelling through a crystalline silica substance counts as processing on its own. Tunnel projects also have their own code of practice, so ask your employer what else your site requires.
Is Sydney sandstone a crystalline silica substance?
Yes. SafeWork NSW lists sand and sandstone at 70 to 100% crystalline silica, and anything with at least 1% counts. Cutting, drilling, crushing or excavating it with power tools or machinery is processing.
Can I remove an old engineered stone benchtop during a renovation?
Yes, if it was installed before the ban started on 1 July 2024. The removal must be controlled, and SafeWork NSW must get written notice before the work starts. Once removed, the stone may only be processed for disposal.
I'm a subcontractor on a Sydney tower job. Who registers me on the Silica Worker Register?
Your own employer, the subcontractor, registers you. The principal contractor does not. It must happen within 28 days of you starting high-risk processing, and it cannot be done in advance.
Do I need silica training to strip tiles out of an apartment?
It depends on your employer's written assessment of the job. Removing tiles, grout or screed with power tools is processing, and if the employer is unsure whether it is high risk, it must treat it as high risk. If it is high risk, you need the training.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.