Silica duties for civil contractors
Roadworks, excavation, kerb and gutter, trenching and saw cutting all disturb materials that contain silica. Civil crews often work outdoors, but outdoor work is not automatically low risk.
Course and test are free. Certificate $49, paid only if you pass.
- Built to SafeWork NSW's 11 criteria
- Certificate + employer training record
- Verify by code or QR
- Secure payment by Stripe
Silica in civil work
Civil projects handle large amounts of crystalline silica substances: rock, sand, concrete, asphalt and pavers. SafeWork NSW lists sand and sandstone at 70 to 100% crystalline silica and concrete at 25 to 70%. Tasks that release silica dust include:
- excavating and ripping rock, and drilling
- road saw cutting and concrete breaking
- kerb, gutter and footpath work
- crushing, screening, loading and hauling spoil
- profiling and milling road surfaces
- sweeping and cleaning up.
Outdoor doesn't mean low risk
Wind can spread dust, but it doesn't make the processing safe. Your written assessment must consider the task, the material, how often and how long workers are exposed, past monitoring and whether dust is likely to exceed half the exposure standard. Respirators and administrative controls are left out. If you're unsure, the work is taken to be high risk.
Controls for civil crews
- Enclosed, filtered cabins on excavators, drill rigs and loaders, with doors shut and positive pressure.
- Wet suppression on road saws, drills and breakers, using equipment designed for water.
- On-tool extraction with M- or H-class vacuums for hand-held tools.
- Isolation: exclusion zones around cutting and breaking, and planning so crews aren't downwind.
- Respirators for anyone still at risk, with fit testing at least yearly.
- Housekeeping without dry sweeping, compressed air or leaf blowers.
Monitoring, health checks and the register
Air monitoring is required when you can't be certain exposures are under 0.05 mg/m³ over 8 hours (adjusted for longer shifts). Results over the limit go to SafeWork NSW within 14 days, even if workers wore respirators. Workers doing high-risk processing need health monitoring and must be on the Silica Worker Register within 28 days. The register asks for the processing location, start date, and whether tunnel construction is involved.
Rollout checklist
- List every task on your sites that processes a crystalline silica substance.
- Assess each task in writing and decide whether it is high risk (if unsure, treat it as high risk).
- Make sure every task is controlled: at least one listed dust control, plus respirators for anyone still at risk.
- Prepare a silica risk control plan or SWMS before high-risk work starts, with your workers.
- Train workers to the approved standard and keep the records.
- Arrange air monitoring where exposure is uncertain and health monitoring for high-risk workers.
- Register high-risk workers on the Silica Worker Register within 28 days.
Read more: what counts as high-risk processing · silica risk control plan or SWMS · the Silica Worker Register · silica training in NSW
Training your crews
Email support@silicaacademy.com.au with your business name and how many workers you need to train. We invoice your business and send single-use codes. Each worker does the free course and test, enters their code at checkout, and gets a certificate and employer training record straight away. You can check every certificate at verify. See for employers for the full process.
Frequently asked questions
Is road saw cutting high-risk processing?
It depends on your written assessment of the task, material, duration and likely dust levels. Saw cutting concrete is processing, and if you're unsure whether it's high risk, treat it as high risk.
Do outdoor crews need air monitoring?
Air monitoring is required when you aren't certain, on reasonable grounds, whether exposure exceeds the limit. Being outdoors doesn't remove that duty.
Do crews working 10-hour days have a different limit?
The 8-hour limit may need to be lowered for longer shifts. It is never raised.
Can we train a whole crew at once?
Yes. We invoice your business and send single-use codes, so each worker does the course and test on their own phone and gets their own training record.
Sources
Last reviewed 21 November 2026. Rules can change, so check the sources for the latest.
Related
Get your silica training done today
Free course and test, built to SafeWork NSW's 11 criteria. Pay $49 only if you pass, and get your certificate and employer training record straight away.